Description
The concept of Best Value is to offer customers the best value product, sourced from a variety of manufacturers all over the world, in any given category, at any point in time. The products selected for our Best Value range are carefully evaluated in terms of price, performance and manufacturing quality before they make it onto our website. Although certainly a 'value' brand, Best Value products are never inferior quality... just superb value for money.
Description
The MZ series provides as strong, durable wall mounting solution for plasma and LCD TV's and monitors between 37" and 50". Installation could not be simpler. Simply attach the wall mount bracket to the wall, mounting arms to the back of Plasma / LCD and hook the two together. EMZ200 provides +/- 15 degrees of tilt whilst allowing clearance for both power and scart cables. Adjustable mounting arms adjust to support VESA standards 100mm x 100mm, 200mm x 100mm and 200mm x 200mm and 600mm x 400mm. Also compatible with non VESA standard TV's and monitors provided mounting holes are between 60mm and 770mm horizontally and between 80mm and 480mm vertically. Wall bracket measures 820mm wide x 225mm high. Finished in silver.
Features
- Durable, cost effective
- Tiltable Wall mount for Plasma / large LCD screens
- Mounts flat or +/- 15 degree angle
- Low profile
- Fits 99% of plasma and LCD screens from 37" - 50" in size
- Attaches screen between 0 and 75mm from the wall
- Quick and simple to install
- Supports plasma screens with mounting holes 60mm--770mm horizontally and 80mm to 880mm vertically
- Supports Plasmas / LCD's up to 75 kg's
- Material: Steel
- Finish: Silver
Customer reviews
Write a review for the Best Value 37-50inch Tiltable Wall Mount - Silver here!
Perfect & no problems
Reviewed by Steve. Review Posted 22/12/2007
I have this bracket supporting a Toshiba 42" panel and I can not recommend it enough. Tilt action makes connections possible after the TV has been mounted which was why I bought it. Thank you DABS!
-
Overall
-
Ease of use
-
Value for money
Good product, supplied with wrong plugs
Reviewed by Neil Postlethwaite. Review Posted 12/04/2007
I agree with the other posters. The bracket is good, if a little pricey for what it is. However the plugs supplied are *expletive deleted* and spin in a 10mm masonry bit drilled hole, and are unusable. I used some other plugs I had, but not after I made an *expletive deleted* of my wall first time, though this was polyfill'd and covered by the wall-mounted telly.
-
Overall
-
Ease of use
-
Value for money
A Good Mount
Reviewed by . Review Posted 12/01/2007
Had same prob as other chap and used some 12mm Rawlbolts which I prefer anyway, so that was not an issue. Although I really did not need the tilt function the added gap from the wall gives a bit better access to the connections on the back of the panel making connecting it up much easier.
-
Overall
-
Ease of use
-
Value for money
Good Wall Mount,Stupid Wall Plugs
Reviewed by MikJ. Review Posted 12/12/2007
The wall mount is fine and does exactly what I was expecting BUT what the hell is up with those damn stupid wall fixings??? The plugs are useless and the bolts are made from some sort of soft cheese!!I ended up using my own plugs and large screws....
-
Overall
-
Ease of use
-
Value for money
Does the job, wallplugs too small
Reviewed by Anonymous Review Posted 16/10/2006
This basically does what it says on the tin, for a much better price than the one's they'll try to sell you in the high street stores. I mounted an LG 42PC1D, fits that model fine.
Installation was mostly straight forward. The only problem I had was that the wallplugs (for fixing to brick) supplied were to small. They just turned in the holes, despite using a 10mm masonry bit as advised. In the end I had to go to Wickes where I bought some 10mm wall plugs - these fitted snugly in the holes and the screws went in fine. So I'd advise using a slightly smaller (8mm or 9mm) masonry bit for drilling the holes if you're mounting to brick and want to use the plugs supplied. Also the masonry screws for the wall mount have hex heads, so you can't use a normal screwdriver (I had to buy one).
-
Overall
-
Ease of use
-
Value for money
Do NOT buy this bracket!!
Reviewed by Craig. Review Posted 22/06/2007
This is typical rubbish from China.
The bolts are made of plasticine and break befroe they even get tight. The bracket is poor quality and overall it will cause you pain and suffering just trying to buy decent components to make it work. Buy something else!!!
-
Overall
-
Ease of use
-
Value for money
The opinions expressed in this reviews section are those of our customers and not of dabs.com. Nothing contained herein amends dabs.com’s terms and conditions.
