Description
This ADSL device set combines an always-on highspeed Asymmetric DigitalSubscriber Line(ADSL) connection to the telephone line,and Universal Serial Bus(USB) connection to a host PC into a single cost-effective solution.
HARDWARE FEATURES : Compliant with ADSL standards Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1)standards *Splitterless ITU G.lite(G.992.2)specification DTM modulation and demodulation Full ¡Vrate adaptive modem *Maximum downstream rate of 8Mbps *Maximum upstream rate of 1Mbps *Support splitterless ADSL implementation ATM SAR (Segmentation and Reassembly) Compliant with USB Specification, Revision 1.1 USB full speed (12 Mbps) Vendor specific descriptors Firmware upgrade via FTP Customizable Web pages WAN and LAN side connection statistics Configuration of static routes and Routing table Configuration of NAT Password protected access election of Bridge or Router Mode PPP user ID and password Configuration of VCs (Virtual Circuits) Password protected system management WAN mode support *PPP over ATM(RFC 2364) *PPP over Ethernet (RFC2516) LAN mode support *bridged Ethernet over ATM(RFC1483) ATM Forum UNI 3.1/4.0 PVC Up to 8 PVCs (Virtual Circuits) ATM AAL5 (Adaption Layer type 5) OAM F5 Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D) Supports up to 16 MAC learning addresses IP routing¡VRIPv2 Static routing DHCP (Dynamic Host Configuration Protocol) Server and Client NAT (Network Address Translation) ICMP (Internet Control Message Protocol) User authentication for PPP PAP (Password Authentication Protocol) CHAP (Challenge Authentication Protocol) Compliant with IEEE 802.3 standard 10/100 Mbps auto selection PRODUCT SPECIFICATIONS : EMC Emission *FCC part 15 class B ,FCC part 68 class B ,CE class B Supported CPU *Intel Pentium 133MHz and above ,PentiumII and Pentium III compatible Minimum System Requirements *Pentium compatible processor 133MHz an above. Windows 98OSR2 build 4.10.2136 or higher version. *Minimum 32MB RAM. *Minimum 2MB available hard disk space . *3.5¨floppy disk driver. Mechanical *Size(app.): 1900 mm (L) X 1250 mm (W) X 20mm (H) Supported OS *Window 98,NT 4.0 and Windows 2000 Power Consumption *2.5W max. Environmental Temperature *Operating : 20%~80% RH *Non-operating : 20%~80% RH *Humidity *Operating :¡Ï0¢J~¡Ï50¢J **Non-operating :¡Ð20¢J~¡Ï70¢J
- ADSL 1 Port (RJ45) Router
- For use with 'Wires Only' ADSL Packages
Customer reviews
Write a review for the Best Value ADSL Conexant 1 Port here!
grr
Reviewed by . Review Posted 29/06/2004
I crashed after 14 months of use and I had to buy another router. I won't touch another Conexant again.
-
Overall
-
Ease of use
-
Value for money
RJ45 was bust
Reviewed by . Review Posted 29/01/2004
bought this the other day, and the RJ45 port didn't work :-(
sent it back to dabs and they have refunded me - very good service.
I'll be purchasing the 4 port one once they're in stock - greater probability of a working RJ45 port :-)
-
Overall
-
Ease of use
-
Value for money
Don't work
Reviewed by . Review Posted 29/07/2004
Also got one - syncs line, and establishes PPP connection ok, it just doesn't allow me to connect to anything.
-
Overall
-
Ease of use
-
Value for money
Not Worth it
Reviewed by Anonymous Review Posted 23/07/2004
Never worked for me, tryed a friends 4 port version and that worked fine. Sent it back.
-
Overall
-
Ease of use
-
Value for money
this modem is rubbish
Reviewed by Anonymous Review Posted 02/01/2004
I bought a PTI PAE-CE81 Modem. and cannot get it to work.
1. No USB drivers on the instal CD
2. Modem will not accept that the lan IS connected to the computer unless I connect it via a HUB
3. NO USB CABLE
4. NO Ethernet CABLE
What is going on with this Modem, I dont want to use
the LAN port but if I dont connect the LAN then the modem doesnt work, If I do connect the LAN from the computer to the modem it doesnt work, It only works if I coneft the computer to a hub and the modem/router to a hub. I just want to use the USB conection I DONT HAVE A HUB!.
Why are there not drivers on the instal CD for USB?
I can only assue that you are tring to go out of business as the only thing this product is fit for is a door stop!
-
Overall
-
Ease of use
-
Value for money
Waste of money
Reviewed by Peter. Review Posted 08/08/2004
Looks cheap initially, but died terminally 3 months in, after losing my settings every few weeks.
-
Overall
-
Ease of use
-
Value for money
Cheap modem
Reviewed by Adam. Review Posted 20/07/2004
Initially this looks like a bargain. But there's no warranty and as above, mine broke while I was configuring it after only 10 months.
-
Overall
-
Ease of use
-
Value for money
Terrible Modem
Reviewed by Anonymous Review Posted 29/07/2004
Worst thing that happened to me, really weak and faulty. Should stop selling this modem.
-
Overall
-
Ease of use
-
Value for money
Product Changed For Worse
Reviewed by . Review Posted 19/07/2004
BEWARE - I've got an earlier DabsValue Conexant, with the AMX manufacturer code, which is running fine, lots of useful Internet resources. This current model is the same-ish hardware with different firmware. Had great problems with it, including menu options which crashed the internal webserver, and it eventually clammed up dead during my attempts to configure it. Got a replacement under RMA, which failed to connect to my ISP (ISP logs indicate no attempt to send the password during login, meaning it will work with the BT tests, but not real life). And again the second one eventually clammed up dead. Go back to the original supplier please!
-
Overall
-
Ease of use
-
Value for money
The opinions expressed in this reviews section are those of our customers and not of dabs.com. Nothing contained herein amends dabs.com’s terms and conditions.
