The DES-1016D is an unmanaged 10/100Mbps switch designed to enhance workgroup performance whilst providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
The switch provides 16 ports, all supporting the NWay standard. The ports negotiate between 10BASE-T and 100BASE-TX network speeds, as well as between full and half duplex. In full duplex mode, the switch's embedded flow control provides a means to protect users against possible data loss during transmission on the network. When connected to a LAN adapter (in a server PC) that supports flow control, the switch sends signals to the PC regarding buffer overrun during peak usage periods. The PC then delays transmission until the switch is ready again to accept new data.
- Product Description
- D-Link DES 1016D - switch - 16 ports
- Device Type
- Switch
- Form Factor
- External
- Dimensions (WxDxH)
- 28 cm x 18 cm x 4.4 cm
- Weight
- 2.8 kg
- RAM
- 512 KB
- Ports Qty
- 16 x Ethernet 10Base-T, Ethernet 100Base-TX
- Data Transfer Rate
- 100 Mbps
- Data Link Protocol
- Ethernet, Fast Ethernet
- Communication Mode
- Half-duplex, full-duplex
- Features
- Flow control, auto-sensing per device, auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward
- Compliant Standards
- IEEE 802.3, IEEE 802.3u
- Power
- AC 120/230 V ( 50/60 Hz )
Detail
General
- Device Type
- Switch
- Enclosure Type
- External
- Built-in Devices
- Led panel
- Width
- 28 cm
- Depth
- 18 cm
- Height
- 4.4 cm
- Weight
- 2.8 kg
Memory
- RAM
- 512 KB
Networking
- Ports Qty
- 16 x Ethernet 10Base-T, Ethernet 100Base-TX
- Data Transfer Rate
- 100 Mbps
- Data Link Protocol
- Ethernet, Fast Ethernet
- Connectivity Technology
- Wired
- Communication Mode
- Half-duplex, full-duplex
- Switching Protocol
- Ethernet
- MAC Address Table Size
- 8K entries
- Status Indicators
- Link activity, collision status, port duplex mode, power, link OK, 100M device connected
- Features
- Flow control, auto-sensing per device, auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward
- Compliant Standards
- IEEE 802.3, IEEE 802.3u
Expansion / Connectivity
- Interfaces
- 16 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
- Compliant Standards
- CE, FCC Class A certified, cUL, VCCI Class A ITE, CB
Power
- Power Device
- Power supply - internal
- Voltage Required
- AC 120/230 V ( 50/60 Hz )
- Power Consumption Operational
- 6 Watt
Environmental Parameters
- Min Operating Temperature
- 0 °C
- Max Operating Temperature
- 40 °C
- Humidity Range Operating
- 5 - 90%
