The DrayTek Vigor AP-800 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features.
The AP-800 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.
For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-800 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.
The Vigor AP-800 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data or home network. (802.1q Feature ETA Q1/2011)
USB Printer Port
The AP-800 has a USB interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-800, or a PC anywhere else on the network to whick the AP-800 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-800s to make a bridge.
WMM - WiFi Multimedia
The AP-800 implements intelligent wireless traffic prioritization for the most efficient management of wireless traffic by using the Wi-Fi Multimedia standard (WMM). WMM defines Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS standard, intended to improve timing critical applications such as audio, video and voice applications over WiFi. WMM adds prioritized capabilities to Wi-Fi networks and optimizes their performance when multiple concurrent applications, each with different latency and throughput requirements, compete for network resources.
Wireless LAN Enable & WDS
Wireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration. To activate, you press and hold the WPS button, then activate the WPS function on your PC; the two devices then automatically exchange encryption keys.
The same button on the AP-800 also serves as a physical on/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active.
By the addition of a simple plug in 'N65' USB module, the AP-800 can operate in the alternative '5.8Ghz' band simultaneously with the standard 2.4Ghz band. As it's simultaneous, you can still use the 2.4Ghz band for some devices. The 5.8Ghz band is much less widely used and therefore less congested. Your PC needs to support this band to take advantage but if it doesn't you can add the same 'N65' USB 'dongle to the PC to add it.
2 Year Warranty
- Header / Manufacturer
- Wireless Access Point
- Rackmount or External
- Networking / Connectivity Technology
- Wired, Wireless
- Miscellaneous / Encryption Algorithm
- WEP, WPA, WPA2, AES, TKIP
- Connection Type
- LAN, Wireless
- Aerial / Antenna Qty
- Networking / Frequency Band
- 2.4 MHz
- Aerial / Gain Level
- 3 dBi
- 300 Mbps
- Networking / Ports Qty
- Networking / Integrated Switch
- 4-port switch
- Networking / Wireless Protocol
- 802.11 a/b/g/n
- Power Device / Nominal Voltage
- AC 230V
- OS Provided / Type
- Fast Ethernet, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
- Networking / Remote Management Protocol
- HTTP, HTTPS
- Networking / Compliant Standards
- IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
- Interface Provided / Type
- Aerial / Directivity
- Power Device / Type
- Power supply
- Interface Provided / Connector Type
- Networking / Network / Transport Protocol
- Miscellaneous / Colour
- Dimensions & Weight / Height
- 13 cm
- Dimensions & Weight / Width
- 11 cm
- Dimensions & Weight / Depth
- 4 cm
- Networking / Manageable
- Networking / Power Over Ethernet (PoE)
- Power Device / Voltage Provided
- 12 V
- Power Device / Power Provided
- 18 Watt
- Dimensions & Weight / Weight
- 200 g
|DrayTek 5dB High-Gain WLAN Aerials (Three In Pack)||Out of Stock||£22.50|
|DrayTek 7dB High-Gain WLAN Aerial (Single)||Out of Stock||£18.00|
|DrayTek 10dB High-Gain WLAN Aerial (Single)||Out of Stock||£36.00|
|DrayTek VigorCare Enhanced Warranty||Out of Stock||£32.56|
Buy used stock
What is used stock?
Used stock is a great opportunity to bag yourself a bargain. There are many reasons why a product may be classed as used stock ranging from missing manuals or software to simply having been opened or having damaged packaging. Some items may have been repaired under warranty. Rest assured though that all used stock comes with a 6 month warranty and is in good working order. You can find out the exact details about each product using the key below.
Condition: Customer return - item has been replaced under warranty by the manufacturer.
- This part of the stock item is present and in good condition
- This part of the stock item is not present or functional
- This part of the stock item is damaged in some way. This damage may not render this part of the stock unusable.
- This part of the stock item is not applicable e.g. it might not include accessories or software as standard
- This item has not been tested.