We’re really sorry but we’ve sold out of this product and are unable to obtain more stock. In most cases this is usually because the manufacturer has discontinued the product. We don’t want you to miss out though so here’s some of our best selling products which are similar to what you are looking for. Take a look and you could just find the perfect item. Just a small point to note - they might not have the exact features as the product you initially wanted so please be sure to check the features before you buy.
The DWL-P200 Power Over Ethernet (PoE) adapter is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges and routers. It enables power current to travel on the Ethernet network cable, thus eliminating the need to directly connect a power supply to the wireless LAN device. The DWL-P200 supports both 5VDC and 12VDC power requirements. Power requirement can be selected through a DIP switch.
Facilitates Installation:
The Power Over Ethernet allows you to install the wireless LAN device and surveillance camera at places such as on a building rooftop, on or near a ceiling, or other difficult places where power is not easily accessible. The idea is increase the usefulness of your camera and wireless LAN to provide connectivity to users regardless of their proximity to a power outlet or a network cable.
Data and DC Power Transmission on the Same Network Cable:
On a standard UTP Category 5 cable, only two pairs (pins 1, 2, 3 and 6) are used for Ethernet data transfer. Power Over Ethernet is designed to take advantage of the unused pins of the remaining pair of cable wires. Consequently, a single Category 5 cable will now carry both Ethernet data and DC power. The idea is to supply the remote end with power and the requirements of Ethernet connectivity via a single Cat 5 cable.
Base Unit and Terminal Unit:
The DWL-P200 includes a base unit and a terminal unit. At one end, the base unit inserts DC voltage into the unused wires (pins 4, 5, 7 and 8) of the network cable. At the other end, the terminal unit splits the data and DC power apart. Data signals continue to travel on remaining network cables, while DC power is fed into the power adapter, which connects to an AC power outlet.
| Product Description | D-Link DWL-P200 - PoE injector + PoE splitter | Device Type | PoE injector + PoE splitter | Input Voltage | AC 100-240 V | Output Voltage | +5, +12 V | Output connectors | 1 x power DC jack | Dimensions (WxDxH) | 5.2 cm x 8.1 cm x 2.8 cm |
General | |
| Device Type | PoE injector + PoE splitter |
Power Device | |
| Input Voltage | AC 100-240 V |
| Frequency Required | 50/60 Hz |
| Power Output Connectors Details | 1 x power DC jack |
| Output Voltage | +5, +12 V |
Expansion / Connectivity | |
| Interfaces | 1 x LAN - RJ-45 |
Miscellaneous | |
| Compliant Standards | FCC Class B certified, C-Tick |
Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Operating | 10 - 80% |
| Humidity Range Storage | 5 - 90% |
Dimensions & Weight | |
| Width | 5.2 cm |
| Depth | 8.1 cm |
| Height | 2.8 cm |
Pop your email address below and we’ll let you know as soon as this item is back in stock:
